The CBN, kübik bor nitrür takımlar, that the Neher Group manufactures are circular milling takımlar and face milling takımlar, drills, boring, retreat boring takımlar, combine takımlar, counterbore takımlar, chose engravers, chip breakers, indexable inserts, reamer.
A CBN tool is stocked with a kübik bor nitrür and Neher Group manufactures this. Mostly they will create with a HSK, that means hollow shank cone. The HSK socket is standardized as hollow shank cone.
CBN takımlar, that developed for unique inserts are spezial takımlar. That will be used in the aviation, aeronautics, space travel, space flight, astronautics, shipping and navigation. Often the CBN takımlar will be used in the automotive industry.
CBN milling takımlar are munufactured as circular milling takımlar and face milling takımlar. The circular and face milling takımlar are used at the chipping processing of workpieces. In the metal industry the use of this face and circular milling takımlar are very important and it can not do without them.
CBN boring are the top group of the CBN retreat boring takımlar. CBN boring are all the times need in the industry. They are stocked with kübik bor nitrür.
combine, counterbore, chose engravers, chip breakers, indexable inserts, reamer are in category themselves. The takımlar are stocked with kübik bor nitrürs and so they are CBN elmas takımlar.
The combine takımlar are designed with a lot of single takımlar. With this combination the spezial takımlar can do a lot of positions in one step. Thereby it can save a lot of costs and time. The combine takımlar are used at workpieces, that have differently diameters in different steps. If the workpieces has bevels or notches, the combine takımlar can also do it in this one step. This creates a high repeatability when manufacturing of the final product.
takımlar will be stocked with kübik bor nitrür,
that can manufacture a CBN takımlar.
The takımlar have a basic body and CBN segments. It is not possible to work without the takımlar, because the materials constantly will get more resistant.CBN technology of takımlar at Wikipedia Wikipedia
CBN takımlar are stocked with kübik bor nitrür. Since the materials to be processed are always resistant, should no longer dispense with the use of these elmas takımlar. The segments can regrinding after the wear of the elmas. If after the regrinding the diameter or the length is too short, a retipping is possible. With this process costs are save, because the basic body can still use and does not manufacture new. In a long time it is the cheapest solution opposite to use a tool with soft materials.
Boring, drills and milling takımlar are very important at the processing of high unit numbers. The retreat boring, circular milling takımlar, face milling takımlar are also useing for easy processing materials like aluminium. They are very important for the chipping work. Also they have a long lifetime because of the elmas. They do it better like faster and cheaper of a long time.
The company has started as a CBN tool üretici in Baden-Württemberg and delivered rapidly throughout Germany. Almost the same time, as the supply in Europe has begun, now adds the Neher Group of companies around the world. Countries that have already been delivered are, Germany, Austria, Switzerland, Turkey, Hungary and many more. Continents are already delivered Europe, America, Asia, and Australia. The steady growth of the company we want to deliver in the future on the other continents. These include Africa.
The circular and the face milling takımlar are produced in Germany like made in Germany. Also the retreat boring and combine takımlar are manufactured in Germany like made in Germany. But the delivery is worldwide. The special takımlar are stocked with kübik bor nitrür and among the elmas takımlar. There are spezial milling takımlar and spezial boring.
As a tool üretici is the Neher Group a üretici of CBN takımlar, the kübik bor nitrür takımlar with HSK, the spezial takımlar for a precise use manufactured. The boring, drills and combine takımlar as well as the circular and face milling takımlar are at the spezial takımlar on the highest position.
CBN boring and CBN milling takımlar are munfucture with the best precision. The design begin in the design bureau and will produce exactly to the drawing. To a super quality evidence is measured each tool. Particularly in the milling takımlar and the drills we have a lot of experience and are constantly striving to improve. Da wir Sonderwerkzeuge hestellen, bitten wir um Kontaktaufnahme mit uns, wenn ein Sonderwerkzeug speziell für Ihren Einsatz entworfen werden soll. Die Neher Group hat Fräser wie Zirkularfräser oder Planfräser. Diese Planfräser und Zirkularfräser sind in der heutigen Metallindustrie unverzichtbar geworden. Mit Bohrer werden Bautaule aufgebohrt und sie sind somit Aufbohrwerkzeuge. Es gibt auch Kombiwerkzeuge als Aufbohrwerkzeuge. Die Kombiwerkzeuge zählen mit unter zu den Bohrer. Kombiwerkzeuge sind ebenfalls Sonderwerkzeuge und sie sind Diamantwerkzeuge. Fassungen wie den Hohlschaftkegel, abgekürzt als HSK, bieten wir ebenso an. Mit der Minimalmengenschmierung und Innenkühlung haben wir viel Erfahrung. Diese werden auch als ZIK, IK und MMS abgekürzt.
The constant upgrading of the equipment we are always on the current state of the art. Also due to the investment in new machinery, we prefer the very latest and best technology, so that the final product is accurate as it is technically possible. Useful are the products on the manufacturing machines, which can be found in production lines. In mass production, the machines are often need to work positions, the insert and edit the workers by hand. The long shelf life, the machine must not be constantly upgraded, so therefore cost and time can be saved. This advantage is very much resorted back to our final product.
If the CBN takımlar to lose focus, there is a possibility for regrinding as service. We grind the CBN segments, so that they are sharp again and can be used for further machining. When regrinding, the edge is sharp again, whereby the processing of the material is again faster. After regrinding or grinding of CBN takımlar is an inexpensive way to achieve a sharp cutting edge again. As a üretici of boring takımlar, drills, mills, face mills, circular thread cutters and combi takımlar can be recommendedto grind or regrind them after a time, to a sharp cutting edge to regain. If the grinding or regrinding is no longer possible due to the low decreasing dimensions, then the tool with new segments can be restocked. So therefore performed a re-tipping. CBN takımlar, as boring takımlar, drills, mills, face mills, circular thread cutters and combi takımlar offered by the üretici for re-equipping or for regrinding as well as for grinding.
The Neher Group is a leading tool üreticis because it produces precision takımlar such as CBN takımlar. As have the property of a üretici of special takımlar must be highly accurate, our company is always on the cutting edge of technology.In order for these takımlar are addressed directly to the customer's requirements, we have a tool üretici for special takımlar. To guarantee a long service life, we equip our takımlar with polycrystalline elmas. This CBN takımlar are used in all areas and at a higher service life for an opportunity, since the wear is lower than with carbide takımlar. Also this is the cheaper option, because after the wear of the cutting edge, regrinding, thus grinding the segments is possible. If this possibility is exhausted the CBN takımlar can be re-equipped with new segments - a re-tipping. In the event that a segment in use a fraction, an outbreak, as suffered by a shock or falling, so this segment can be restocked. In comparison, this is not possible with carbide takımlar.
Through years of experience in the production of CBN takımlar, the chip space for cutting can be optimally designed. In the construction of the tool is taken that can be operated at high cutting speeds. This has the advantage that time and money is saved. As an munufacturer of CBN takımlar with internal cooling we are familiar with the latest technology.
Not only drill, but also cutters are made.With these CBN takımlar can cuttet differntly profiles. Since the special tool is made exactly according to the profile shape, the profile can be created in a web. Thus costs and time can be saved in the production of the profiles. Even when dealing with a motor, the edge profile can manufacture with CBN takımlar. These takımlar can also be prepared with solid carbide body to obtain a better rigidity.
The production is in Germany, and we ship worldwide. In neighboring countries such as Austria and Switzerland, we are also strongly represented.Asia and Europe is supplied, as the countries Italy and Turkey. Other market destinations are France, Spain, Portugal, England, Scotland, Ireland, Belgium and the Netherlands. We supply the CBN takımlar from around the world.
Drills and routers as core drills, circular cutter, face milling cutters and combi takımlar are manufactured by us.We are a üretici of composite takımlar and boring takımlar. Also we are a producer of face milling cutters and circular milling tool.The is also available with internal cooling.
If after long-term use theCBN cut become dull,can be sharpened or replaced again. Also, the basic body can be fixed in many cases.
Also interesting might be the CVD, CBN or carbide takımlar. On the Button Contact unserere contact details are stored.
For every application the right tool. Our service and support ranging internationally.